PUMP, FLYGT, 2201.011, 244 HT, 575V, REPAIRED
$15,000.00 CAD ea
British Columbia, Canada
| Category: | Mill Process - Pumps |
|---|---|
| Equipment Number: | 2201.011R |
| Manufacturer: | OTHER |
| Model: | PUMP, FLYGT, 2201.011, 244 HT, 575V, REPAIRED |
| Quantity: | 1 |
Show Alternate Currency Estimates
- $11,111.93 USD*
- $16,736.80 AUS*
- $8,936.22 PND*
- $41,576.41 PEN*
- $9,339,247.35 CLP*
- $197,103.49 MXN*
*Alternate currency pricing is only an estimate. If a firm quotation in another currency is preferred please contact the equipment representative displayed with the advertisement.
50 feet of SHD-GC cable and Zener Diode installed -
Submersible pump for dewatering construction sites, draining water in flooded areas, handling water in mines or on oil platforms and other
similar applications. The pump can handle water containing relatively abrasive solids.
Product code 2201.011
Impeller characteristics LT, MT, HT
Discharge connection 4”, 6”, 8”
Liquid temperature max +40° C
Depth of immersion max 20 m
The pH of the pumped liquid pH 5 - 8
Liquid density max 1100 kg/m³
Strainer hole size LT, MT (15 mm x 45 mm)
Strainer hole size HT (10 mm x 10 mm)
Motor data:
Squirrel cage 3-phase induction motor.
Frequency 60 Hz
Insulation class H (+180° C)
Voltage variation:
– continuously running max ± 5%
– intermittent running max ± 10%
Voltage imbalance between phases max 2%
No. of starts/hour max 15
Monitoring equipment:
Thermal contacts.
Cable:
Direct-on-line and Y/D start SUBCAB®
Materials:
Outer casing Galvanized steel
Impeller Alloyed white iron
Wear parts Nitrile rubber
Stator housing Aluminum
Strainer Galvanized steel
Shaft Stainless steel
O-rings Nitrile rubber
Mechanical face seals:
Inner Corrosion resistant cemented carbide
Outer Corrosion resistant cemented carbide
Weight:
Total (excl. cable) 280 kg
Submersible pump for dewatering construction sites, draining water in flooded areas, handling water in mines or on oil platforms and other
similar applications. The pump can handle water containing relatively abrasive solids.
Product code 2201.011
Impeller characteristics LT, MT, HT
Discharge connection 4”, 6”, 8”
Liquid temperature max +40° C
Depth of immersion max 20 m
The pH of the pumped liquid pH 5 - 8
Liquid density max 1100 kg/m³
Strainer hole size LT, MT (15 mm x 45 mm)
Strainer hole size HT (10 mm x 10 mm)
Motor data:
Squirrel cage 3-phase induction motor.
Frequency 60 Hz
Insulation class H (+180° C)
Voltage variation:
– continuously running max ± 5%
– intermittent running max ± 10%
Voltage imbalance between phases max 2%
No. of starts/hour max 15
Monitoring equipment:
Thermal contacts.
Cable:
Direct-on-line and Y/D start SUBCAB®
Materials:
Outer casing Galvanized steel
Impeller Alloyed white iron
Wear parts Nitrile rubber
Stator housing Aluminum
Strainer Galvanized steel
Shaft Stainless steel
O-rings Nitrile rubber
Mechanical face seals:
Inner Corrosion resistant cemented carbide
Outer Corrosion resistant cemented carbide
Weight:
Total (excl. cable) 280 kg
 | |
| Mine Site: | CAC Industrial Equipment Ltd. |
|---|---|
| Contact: | Chelsea Turner |
| Phone: | 2506567788 |